Home

M1 helmet liner identification

Great Prices On M1 Helmet Liners - M1 Helmet Liners On eBa

  1. THE FIBER LINER. The first M1 liners were manufactured of fiber (a material similar to cardboard) and covered in olive green twill cloth. Hawley Products, (a renown manufacturer of fiber sun helmets for both the US and Canadian militaries) and the General Fibre Company were chosen to manufacture the M1 fiber liner, Today, these liners are referred to by collectors as Hawley liners
  2. How to identify US WWII M-1 helmet liners by manufacturer. This guide will help identify the manufacture stamps of The Hood Rubber Company, St Clair Liner, CAPAC Manufacturing, Firestone Tire and Rubber Company, Inland Manufacturing Division, International Molded Plastics, Inc, (IMP), Mine Safety Appliance (MSA), Seaman Paper Company, Westinghouse Electric Company and various Korean War and.
  3. 1944 us m1 steel helmet 1950s era liner this steel helmet is an actual ww2 issued helmet that was manufactured between october of 1943 and october of 1944. Vietnam m1 helmet liner identification. The interior of the liner has been left unpainted and is more orange than the high pressure liner
  4. M1 helmet and liner identification? Hi. This is another M1 that I have had for a couple years. I just wanted to get you guys opinion on what war it was from and what kind of liner is with it. the helmet has a m310 number swivel bails and rear seam. the liner has no makers marks just a + on top dead center. This is the first one I bought and.

US WWII M-1 FIXED BALE HELMET The M-1 Helmet (1941 - 1943) The M-1 helmet was well under production before December 7th 1941. The first production batch started on June 26 and resulted with over 323,510 M-1 helmets before the war had even began. The Ordnance Department selected McCord Radiator and Manufacturing Company of Detroit Michigan to produce the steel M-1 helmet bodies The M1 helmet was a unique and practical solution, compared to its contemporaries. A separate lining system had many advantages. Being light weighted it could be used without the steel shell for guard or ceremonial duties, whilst the shell itself could also double up as a wash basin in the Field. Brought into service in 1941 the M1 liner. The US M1 helmet is standardized on April 30, 1941 and is approved on June 9, 1941. The M-1 helmet, differ from the other models by this construction in two independent parts that we call the heavy pressed steel helmet with stainless steel rim (Body) and the light fiber helmet (Liner). Its shape remained unchanged throughout the conflict, but.

Identifying and Collecting WWII M1 Helmet Liners

  1. THE M1 STEEL HELMET. Adopted shortly before the United States entry into WWII, the first production M1 helmet shell was made of manganese steel coated in cork aggregate and dark olive drab paint. This combination gave the helmet a dark, coarse, appearance and texture. An alpha/numerical stamp is located on the lower inside front of the helmet.
  2. For future reference: On the inside crown of most every helmet liner made in WWII, is a manufacturers identification stamp. Below are graphics of what each stamp should look like along with the manufacturers name: First up, a low pressure liner manufacturer: Hood Rubber Company, Inc. Watertown, M..
  3. Now that you are familiar with the steel M1 helmet shell, you will need to find a liner. In early 1941 McCord tasked Hawley Products Co. of St. Charles, Illinois to produce a suitable liner for its steel helmet. The temporary solution was a liner that consisted of two rigid fiber shells cemented together, impregnated with water resistant chemicals, covered with olive drab fabric, and outfitted.
  4. 1944, US M1 Steel Helmet & 1950's era Liner. This steel helmet is an actual WW2 issued helmet that was manufactured between October of 1943 and October of 1944. This steel helmet has the characteristic front seam on the helmet rim. After October of 1944, the rim was changed from stainless steel to Hadfield Maganese steel and the seam was moved.
  5. M1 helmet: When the Austrian Bundesheer was reformed in 1955, it was initially equipped with U.S. made M1 helmets (30,000 of which were provided by departing US forces). The featured example is a late WWII issue M1 helmet with a rear seamed rim and cork textured paint
  6. Page 1 of 2 - Helmet Liner Maker Markings - posted in HIGH PRESSURE LINERS [REF]: Guys can you help identify and date one of my M1 steel helmet liners it has …. Dating m1 helmet liners years. Pioneer surround sound hook up; Dating natali kiev; Married willing to believe that dating m1 helmet shell they’re a good person and

Helmet Liner Suspension, 8 x 7, Plastic Frame w/Foam Padding & Leather Strap, Used. Product #: 1774700. $9.50. Add to Cart. Add to My Saved Parts. Eligible for FREE shipping *. Helmet Liner, Stamped Sub Capacete M1964 Vestolen A4516, Used. Product #: 1778270 The Liner in detail The lining system of the M1 helmet went through a variety of changes, both in material and design. The lining was quite unique for the period in being a separate body that slipped into the steel shell, as opposed to other helmets of the era, where their lining systems were either pinned, sewn or bolted to the shell Assembling your helmet You should have the following helmet components. M1 Steel Helmet Helmet Liner Mitchell Pattern Helmet Cover Scrim Band Headband Neckband (Optional) Chinstrap Fitting the Helmet Cover First place the M1 helmet on a surface right way up and undo the chinstrap if you have one. Stretch the helmet cover over the helmet

M-1 Steel Helmet

The first mass produced M1, this fixed bale helmet has the short chinstraps which were unable to be affixed around the rear of the shell, the shell is a McCord manufactured front seam with rough textured paint. The fibre liner was made by Hawley Products Co and were made of two layers of compressed fibre, these liners were replaced in 1942 due to their poor durability in humid climates. October 20, 2016 ·. How to identify a WWII U.S. M1 Helmet Liner, by QuestMasters Museum. The High Pressure M-1 Helmet Liner shown here was produced from Spring of 1942 until the Summer of 1945 and then again in 1950, by the overlapping of resin impregnated fabric strips being compressed between metallic forms under high pressure The M1 is a combination of two one-size-fits-all helmets—an outer metal shell, sometimes called the steel pot, and a hard hat-type liner nestled inside it featuring an adjustable suspension system. Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner M1 Helmet Stencil USA 99th Infantry Division WW2 insignia Battle of Bulge. £8.99 More Info >> M1 Helmet Stencil USA 4th Ivy Infantry Division WW2. £8.99 More Info >> M1 Helmet Stencil USA 29th Infantry Division WW2 WWII Ying Yang. £8.99 More Info >> M1 Helmet Stencil Template 9th Infantry Division 39th Regiment AAAO WWII.

Join the Museum of America's Mannie Gentile for this brief look underneath the M1 Steel Pot to get a gander at some reallycool M1 liners the basics on helmet era identification. Email andrew@nov8v.com to send pics of your helmet WWII USN D-Day Invasion Fixed Loop M1 Helmet & Matching Westinghouse Liner Set Sold. New Arrival Quick View. WWII German M40 Camouflaged Single Decal Kriegsmarine Helmet Set (EF64) Price $2,000.00. Quick View. Mid-WWII U.S. International Molded Plastics M1 Helmet Liner (Complete

How to Identify Us Wwii M-1 Helmet Liner Manufacturers

Vietnam M1 Helmet Liner Identification helme

Airborne chinstraps were attached directly to the liner, infantry chin straps to the steel pot - this is the M-1C helmet, and very collectable. If the chin strap has a split chin-cup and angled clips, this is a post-war helmet, so avoid it. 5) Liners should have appropriate dates M-1 liners also require careful checking The sole marking on this helmet is this embossment in the dome of the liner. Inside an out this Dutch version of the NATO version of the M1 is a solid, well-engineered, and soldierly helmet which held the line against generations of commies, but finally fell to the modern composite lids of today Product Description. Original WWII GI Front seam M1 Steel Helmet shells repainted OD with aggregate. The WWII GI high-pressure liners have been stripped, repaired and restored. Helmets and liners are complete with new reproduction Khaki HBT Webbing, leather sweatband, khaki nape strap and leather chinstrap

Well , it seems you got yourself a couple of U.S. m1 shells (no liners) and three British (or Canadian?) Mk helmets (Brodies). There is a date on the liner (on one the three black spars under the leather) . To be noticed the U.S. used similar helmets until 1942 , but they had a different liner and a leahter chin strap TopPots.net liner identification photos ; M-1 Helmet.com; JMurray Inc, Helmet Restoration Supplies; The M1 Helmet In Normandy: A Photo Study ; 90th IDPG Projects. Re-Webbing M1 Helmet Liners Author: Chris Guska Date: July, 2009 Step 2: Paint Remova Unlike German helmets and modern day Kevlars, the M-1 M-1C and M-2 helmets and liners come in only one size. The sweatband in the liner adjusts to fit your head via a slide buckle like some baseball caps. Thus, one size fits all. If you get a helmet and it's too tight, you simply need to adjust the sweatband. It's very, very simple 3.) Place the A washer over the rivet, so that V of the A points towards the open end of the helmet. 4.) Place the liner down on a hard surface, with the rivet still installed, preferrably with the domed rivet head on something metal. If you made your own liner kits - use the bucking bar (flat plate with 2 dimples) from the segma snap setting. An Early M1 Helmet With Fixed Bales, Front Seam, Sewn Chinstrap Some Stress Cracks To Rear As Usual With Early Shells. C/W Saint Clair Low Pressure Liner. All Straps Complete But Well Worn. Normal Edge Cracking On Liner. With Name & Triangle Stuck With Glue. Original Paintwork & Decals This Is A Rare Helmet From An Historic WW2 Front Line Brigade

helmet and linerstandard US Army M1 Hadfields manganese steel helmet with liner. The helmet bears a red diamond (divisional insignia) with a single vertical white rank bar in front and evidence of a single large white vertical officer identification bar on the back. The helmet has bullet damage on the rear right hand side. Fibre liner has similar markings Identification Hello everybody, this is my first time posting but I have been lurking this sub for a while. I have been talking with a seller of an M1 helmet on eBay and getting details from them to try and figure out if it is genuinely an American helmet, and not a euroclone

Help to identify M1 helmets?

The M1917A1 was commonly referred to as the Kelly a refurbished M1917. Between 1932 and 1936 the M1917, both US and British made, was modified with a new leather liner and a web chinstrap. McCord Radiator Co. also produced 900,000 new M1917A1's under a contract that was terminated early to switch to the M1 in 1941 which quickly replaced the. This helmet consists of an early M1 Steel helmet with fixed bales, early Hawley M1 fiber liner, and what is commonly called a type I USMC camo helmet cover. The cover has had two slits cut for better fit and this feature is found on most issued covers: One of several features to look for on an original cover is chain stitching on the beach side

New Pick! Picked these bad boys up for 80 bucks at the local thrift store, One's a Firestone over the inland stamp, and the other a Seaman paper company M1 l.. CSIB - Combat Service Identification Badge Air Force OCP Occupational Badges OCP Name Tapes Austrian M75 Helmet with Liner - M1 Helmet Clone - SIZE 53-55. Sale price $49 99 $49.99 Save $20 Clearance! Buy Now and Save. Email When Available. U.S. M1 Style Helmet with Inner Helmet. German Helmet Liner Info. This information applies to BOTH original and replica liners. German WWII helmets models M35, M40 and M42 come in one of seven sizes. The liners DO NOT adjust, and are not universal as are US liners. This is a source of endless confusion and consternation to collectors and re-enactors Original Item: One of a Kind. The Vietnam war ended up causing quite a bit of controversy in the United States, especially as casualties mounted on both sides, and the war seemed no closer to being over. What we have here is a U.S. M1 Helmet liner, possibly from WWII, that was outfit and decorated with a large PEACE on the back on a sun, rising over mountains with the rays of the sun expanding. Identification. Close. Vote. Posted by 8 minutes ago. I found this M1 helmet and liner at a flea market in Detroit and it looks a little different from my other M1 liner, it has a different color and pattern inside then my other M1 liner. Identification. 1/9. The liner

M1 helmet and liner identification? - War Relic

The shell was most likely manufactured by McCord since they made something like 90% of WWII era helmets. If there is an S on underside of the brim, it is Schlueter manufactured. Here is a picture of a McCord front seam swivel bale shell that I picked up for $20 from a guy on Craiglist with several M1 shells. The chin straps are missing, but the. Israeli M1 combat helmet. In 1948 the fledgling State of Israel was a hodge-podge of military materiel from other nations. 1948 Haganah soldiers during the War of Independence wearing. a mix of British Mk I and Mk III (turtle shell) helmets. Israeli soldiers, all wearing the British Mk II helmet, at the. Wailing Wall during the Six-Day War of. Our US M1 Helmet Liner WWII Reproduction comes with the plastic inner liner, web suspension system and fully adjustable sweatband with chin strap. Perfect replacement for an original M1 Helmet. Sku:124-802110. Price: $24.95. US M1 Helmet Net

Original Item: Only One Available. After WWII, there was a very large surplus of M1 helmets, as well as M1 helmet liners. Many liners were then used during the 50s-70s as training helmets, and would have the outside painted to match the unit they were used with. This was done with both newly produced helmets, as well as older WWII issue helmets, which did not have the more modern features on. Super netted ETO officer's M-1 Helmet! $1,950.00 Sold Out. SOLD!29th helmet with previous 327th markings $2,750.00 Sold Out. SOLD!Fixed loop helmet with MSA liner $375.00 Sold Out. SOLD! Nice and salty fixed loop helmet! $425.00 Sold Out. SOLD! Fixed loop Navy Gunner's helmet with Hawley liner $550.00 Sold Out. SOLD HELMETS $0.01 Sold Out

M1 HELMET LINER The liner contains the suspension for the helmet and is placed inside of the helmet shell. The same identification could be applied to the helmet shell. These type of markings were normally issued to individuals in a leadership position. The idea was that soldiers behind the leader could identify the person in situations. WW2 M-1 Fixed Bale Helmet Grouping - 6th Armored -Normandy Purple Heart £ 1,950.00 Coming Soon; WW2 Luftwaffe Helmet - Vet Bring Back £ 725.00 Coming Soon; WW2 US M1 Liner- 29th Infantry Division - Relic Normandy £ 375.00 Sold Out; M-1 Fixed Bale Helmet Grouping £ 1,750.00; WW US M-1 Fixed Bale Shell - Camouflaged £ 525.00; WW2 German. WW2 US Swivel Bail, M1 Helmet w/ Mine Safety Appliance Liner, Both w/ Original Applied, Lieutenant's Bar Insignia: WW2 US Swivel Bail M1 Helmet with Mine Safety appliance Liner. both pieces have original Lieut. Bar insignia on helmet and liner. The set $390.00. 003900 Accurate repro WWII US Army M1 helmet, inner shell made of plastic, outside shell made of steel, liner made of leather and canvas. Net Weight :1.415 kg Size: adjustable, fitting all. The picture may be a bit different somewhat in color from the product you will receive due to different monitor. Please be aware before bidding

How to Identify Us Wwii M-1 Infantry & M-1c Paratrooper

How to Identify a WW2 M1 Helmet - YouTube

US Pattern M1 Helmet. The field helmet in use by the Canadian Armed Forces at the time of Unification was the American designed M1 helmet. Adopted by Canada as standard in 1960, a limited number had been in Canadian service since the Second World War. The M1 helmet was made in two parts, an outer steel shell and a removable fibreglass liner U.S. P17 Helmet liner. The British Mark I has a rubber ring sometimes called a doughnut sewn between two pieces of wool in the base of the helmet dome. The doughnut was added for the wearers comfort. It was undoubtedly a welcome relief from having the helmet constantly bounce up and down on the top of the wearer skull while running across no. WWII US M1 helmet liner is a westinghouse - capac markings in the metal helmet are not lisible: SOLD: US M1 helmet (Viet Nam) with liner (E) SOLD: US M1 helmet (Viet Nam) with liner (D) SOLD: WWII US AAF flight helmet type A10A Size is medium maker is Bates shoe Co. SOLD: WWII US Civilian worker helmet with liner. No Argentine helmet used the shield, however you can see M1 liners with shields from the Air Force and round national shields. In this case is a custom metal helmet with a soddered shield. M18 Swiss Helmet from the National Gendarmerie

WWII US Army M-1 Helmet Liner - The M-1 steel pot helmet is one of the most utilitarian designs produced for a U.S. helmet and one of the longest lasting. Many news reels and pictures show the GI's using their helmet to cook, dig, carry water and many other functions. The helmet is composed of a metal shell and a separate liner with a. The inside of the M1 helmet had a molded fiber-plastic liner. (David Miller, Division of Armed Forces History, NMAH) The M1 helmet, 1941-1979, was worn by military personnel beginning in World War. A complete replica of the WWII U.S. M1 Infantry Helmet, these M-1 steel helmets are reproductions of the US WWII army infantry helmet and liner. Our M1 Helmet includes a steel outer pot, plastic inner liner, web suspension system, with fully adjustable sweatband and adjustable chin strap

M1 HELMET LINERS - All You Need To Know

Paint color is taken from this Un-issued M1 WWII Helmet! We finally come close to the right color for this type of helmet. This goes on smooth and you have to add the texture to the outside of the helmet. Related Items: Imperial Japanese WWII Helmet Spray Pain The M 1917 A 1 remained the standard U. S. helmet until 1940, when the Chief of Infantry requested a new helmet. The TS3, a pot-shaped helmet shell with removable liner incorporating a suspension system, was then developed. World War II In 1941, the TS3 was tested and approved and designated the U. S. Steel Helmet, M1 The Maker stamp together with the helmet size stamp are found on the wearers left side or for a mid to late war helmet the maker and size stamp are found above the lot number on the back. Following helmet sizes were produced with the most common size of the day being size 62 and 64. Size 70 and 72 helmets are very rare. 60 with 52 or 53 liner ban US WWII Identified M1 Steel Helmet & Hood Rubber Liner, Price: $395.00 Item #56347. US Grenada Era Steel Helmet, Cover & Liner Price: $95.00 Item #56348. US WWI Doughboy Helmet, British Mfg., 5th Division. Price: $165.00 Item #56349. US Vietnam War Era, Mitchell Pattern Camouflage Helmet Cover, 196 The M1 helmet is a combat helmet that was used by the American military from World War II until it was succeeded by the PASGT helmet beginning in 1985. For over forty years, the M1 was standard issue for the U.S. military and naval forces, and has become an icon of the American military, with its design inspiring other militaries around the world

The US M1 Helmet guide : production, types, details, liner

Starting at$24.95Regular Price$49.95. Made In USA G.I. Made In USA G.I. Make a Selection. Add to Wish List. Add to Wish List Add to Compare. GI Vietnam Era M1 Airborne Paratrooper Helmet Liner Chin Strap. CH_VNACH. $5.95 The M-1938 Tank Helmet could be worn under the M1 steel helmet for slightly increased ballistic protection, this was seldom done in the field. It was virtually impossible to wear the M1 over an M-1938 Tank Helmet with the M1's liner in place, because the liner's webbing barely fit around the shell of the M-1938 helmet OK it appears to be a 1965-1990's period M37/65 Swedish Military helmet. The shell was originally designed in 1937, and remained in use by Sweden until the 1990s. In 1965, the liner, which was a three-pad leather liner, was replaced with an U.S. M1 style liner, relevant to most other models in the world at that time

WW1 & WW2 Helmets Of All Nations Bought & Sold. US M1 Helmets & Liners British Mk2 Brodies British 'Turtleshell' Mk3/4/5 German WW1 & WW2 Helmets. M16 , M17 & M18. M35, M40, M42 I Am Interested In Purchasing Any Old Helmets. Click to open image! Click to open image! Click to open image! Click to open image! Click to open image! Click to open image US Army M1 Helmet Liner Neck Band - SMC 1945 . FLU1039 $ 25.00. US Army M1 Helmet Liner Neck Band. FLU1038 $ 15.00. US Army M1 Helmet Liner Neck Band MIL-B-1953A . HU1037 $ 15.00. WW2 German HJ Luftwaffe Flak Helper Eagle . EFL4531 $ 75.00. WW2 German Security Police (Schuma) cap insignia . EFL4530 $ 85.00 The M1C helmet was a variant of the U.S. Army's popular and iconic M1 helmet.Developed in World War II to replace the M2 helmet, it was issued to paratroopers.It was different from the M2 in various ways, most importantly its bails (chinstrap hinges). The M2 had fixed, spot welded D bales so named for their shape. It was found that when sat on or dropped, these bails would snap off

Collecting WWII-Era M1 Helmets: A Beginner's Guide

German M-18 Helmet Liner and Chinstrap. M18 helmet liner with Chinstrap from Prairie Flower Leather Co. These are high quality reproduction M18 German helmet liners and chinstraps made in the USA. Manufactured just like the originals including pads, pillows, steel band and the correct tie.. US M1 Airborne Helmet Replica. $ 199.99. Here we have a reproduction USA world war two airborne helmet for sale. This helmet is new made item is exactly how they were made back in WW2 for united states paratroopers. US M1 Airborne Helmet Replica quantity. Add to cart. SKU: 123-999 Categories: United States, US Helmets, WWII Helmets c054082 u.s. m1 combat helmet with fiber liner 2nd lt franklin e. geiger . c077584 u.s. m-1 swivel bail combat helmet (with camo net). c035473 u.s. m-1 swivel bail combat helmet. c006383 u.s. ww2 m-1917a1 combat helmet. c011984 u.s. civil defence helmet. c001984 usn mk-2 flak helmet.. item description . military issue, steel m1 combat helmet. the object still retains most of its original components, including: reversible woodland camouflage helmet cover with foliage slits, od green steel pot helmet shell with bales at proper left- and right-hand sides for chinstrap attachment, laminated nylon nestled helmet liner, elastic helmet band, suspension webbing, leather sweatband. Reproduction M1 Helmet - Woodland Camo Cover - Helmet Band Removable Plastic Helmet Liner Adjustable, one size fits most Helmet weighs approximately 3 lbs 4 oz Nearly identical to the Original, but more comfortable! Great for theater, plays, reenactments, costumes or display! IMAGES were taken of one of the items in o

"Euroclones" - An essentiel collector's guide - OCAD

An M1 helmet liner that has been hand camo painte with black, yellow and reddish brown. The liner itself is post-war European manufactured and will fit into a US M1 shell. It is a pretty cool looking liner that would make a nice display or could be worn for reenacting or paint balling German combat helmets were made by several different manufacturers during WWII. And, unlike the US M1 helmet, the German helmet came in a variety of sizes. For collectors, it is always important to identify the manufacturer and size of a helmet

This 1950's and 60's era helmet is in good condition and includes the liner. Liner is complete with suspension and leather chin strap. Great for a display piece. Genuine European Military Surplus. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Bryburn Trading Co Pty Ltd has a large collection of surplus military gear and collectibles from overseas agents and governments, Australian Government Disposal sales and US Government Surplus sales. Many of these items are now difficult, if not impossible, to find anywhere Price: $785.00. Original German WWII M40 Single Decal Luftwaffe Helmet hkp64. Price: $865.00. Original German WWII M35 Single Decal Kriegsmarine Helmet SE64. Price: $645.00. Original Imperial German WWI M16 Helmet With Partial Liner Size 64. Price: $325.00. Original German WWII M34 Fire/Police Aluminum Helmet. Price: $285.00 nice post vietnam m1 helmet w/ liner & camo cover. rear seam, swivel loop m1 helmet has good paint and retains the last pattern chin straps. the liner is 1983 dated and has a 1988 dated leather sweatband. good woodland camouflage helmet cover. the elastic band has a name stenciled to the front. the set shows light use and wear Original Early Leather Liner Chin Strap With Green Hardware: This is a nice original early leather helmet liner chin strap with green hardware. This is the very early strap with the flat buckle. These are very hard to find. The strap is in nice used condition. It would look great on an early combat helmet

Helmet Liner Manufacturer Identification Logo's & Markings

WW2 Paratrooper Solider Helmets Net Cover Green for M1 M35 MK2 Military Retro. C $19.91. C $2.49 shipping. 11 sold. ORIG. WWII U.S. M-1 WESTINGHOUSE LINER - RESIZED TO CREATE A CHILDS TOY HELMET! C $12.52. 0 bids. Ending 18 Jul at 18:25 EDT Repro US M1 Helmet Liner . £14.95. Add to Basket. Add to Wishlist Add to Compare. Multitarn Camo Softshell SCU Jacket . From £64.95. Add to Basket. Add to Wishlist Add to Compare. Russian Navy LONG Sleeve Top - NAVY Blue Stripes . From £14.95. Add to Basket. Add to Wishlist Add to. PLASTIC HELMET LINER TOTALS, 1941-1945. Ten companies produced the helmet liner shell, while an additional 30 were responsible for the manufacture of the various components that went into the liner. The total number of plastic liners produced, were at least 39,723,000 during the years between 1941-1945. Helmet liner production was discontinued.

What to Look for When Buying a WWII M1 Helmet (Beginner's

Proven to provide reliable service for many years Designed and tested with the utmost safety in mind. $49.00 - $55.00. Schuberth® SV1 Face Shield for C3 Pro/C3/C3 Women's/S2 Helmet. 0. # 2526139097. SV1 Face Shield for C3 Pro/C3/C3 Women's/S2 Helmet by Schuberth® WWII German Luftwaffe General's Uniform Insignia Set (Shoulder Boards, Collar Tabs and Breast Eagle) This is for a set of Luftwaffe General Collar tabs, Shoulder Boards and Breast Eagle insignia. The images are just examples of the various General grades and backings. Feel free to email us directly using the Contact

Does anyone know where I can find an authentic ww2 m1